iRig Pro to Audio Amp

[enahmad]

I wish to connect an instrument transducer to the input of the iRig Pro, supplying it with phantom power from the iRig Pro itself, and the output to an audio amplifier.

The transducer has an XLR connector which can be plugged directly into the iRig Pro interface. The amplifier has 1/4" input plug. (I could use a 3.5mm to 1/4" converter, the size is not the issue.) What I don't know is if an adaptor exists to convert the lightning or the USB ports in the output cable of the iRig Pro to an audio jack.

Or, if a separate cable exists (from IK Multimedia or otherwise) with the mini-DIN socket in one end (for the iRig Pro output) and an audio jack on the other end.

The setup above would provide me with a portable preamp with XLR input, which can supply phantom power. Many thanks.

[Ryan_IK]

The iRig Pro I/O will require a connected iOS device. Unfortunately, there is no adapter from the Mini-DIN port to an audio connection, this Mini-DIN port must be connected to an iOS or Android device, or Mac/PC system.