iRig Stomp I/O Users Topic - Experiences and Questions

[Timo2019]

...and another...
https://youtu.be/u2ct4OIz2Ys

[Timo2019]

...last, but not least... These performances are why I purchased the IRig Stomp I/O...
https://youtu.be/N41t_xYL7Ks

[Timo2019]

Sorry about the sound quality but I couldn't waste this...
https://youtu.be/mMrbYhGrv1c

[smcvey]

Hmmm... Says it is unavailable.

[Timo2019]

?

[Peter_IK]

Is that video currently private? That would typically be the reason we wouldn't be able to see it.

[Timo2019]

Good call Peter, see if that works... it was late... Thx

[juanloredo]

Hi, I have some questions regarding the unit and how to activate the looper in Amplitube PC

1.Do I have to set up something to make the looper work with the unit? cuz I'm presing the 1&2 together and then pressing 3 to get the loop started and it doesn't do anything.

2. Do I have to be in looper mode in amplitube for the looper to work, or if I'm in recording mode, pressing the 1&2 will jump into looper?

3. There's a jump in the audio output volume when I switch between recording and looper mode, looper mode is louder. All the settings are exactly the same and the meter bars inside amplitube I think register the same, but the meter bar in the unit clearly shows there's more volume (like it gets to the red LED a lot) I don't remember this ever happening with my previous audio interface(but I'm not sure)

Thanks!

[Ryan_IK]

Hi, I have some questions regarding the unit and how to activate the looper in Amplitube PC

1.Do I have to set up something to make the looper work with the unit? cuz I'm presing the 1&2 together and then pressing 3 to get the loop started and it doesn't do anything.

Make sure to update to the latest version of AmpliTube 4 Mac/PC. This update will be in your the User Area -> My Products section (https://www.ikmultimedia.com/userarea/) of your IK Multimedia account.

Once you are using the latest version, select 'MIDIIN2' - iRig Stomp I/O ('iRig Stomp I/O Control' on Mac) for your MIDI input. This will enter 'AmpliTube Mode' for your iRig Stomp I/O.

*The MIDI input selection will be in your 'Audio/MIDI Set Up' window which can be found under the 'Settings' drop down.

The other option 'iRig Stomp I/O' ('iRig Stomp I/O Port 1' on Mac) will be used when using the iRig Stomp I/O as just a MIDI interface.

Enter the 'Looper' section of AmpliTube, then hold pedal's 1 and 2. This will enter Looper mode.

2. Do I have to be in looper mode in amplitube for the looper to work, or if I'm in recording mode, pressing the 1&2 will jump into looper?

Yes, the Looper mode is designed to control the AmpliTube 4 'Looper' section.

3. There's a jump in the audio output volume when I switch between recording and looper mode, looper mode is louder. All the settings are exactly the same and the meter bars inside amplitube I think register the same, but the meter bar in the unit clearly shows there's more volume (like it gets to the red LED a lot) I don't remember this ever happening with my previous audio interface(but I'm not sure)

Thanks!

While this sounds unusual, do note these sections are meant to be completely separate sections of AmpliTube 4 with different loaded 'Rigs'.

Be sure to check this noise with out support team.

http://www.ikmultimedia.com/contact-support/

[juanloredo]

Ryan_IK thanks! this worked perfectly!

[antzy69]

Just received mine today, regardless of how much pressure I put on the expression pedal is does not turn on. Any suggestions?

[antzy69]

OK managed to get it working, had to do a calibration as per the manual as it was way out.

[Ryan_IK]

OK managed to get it working, had to do a calibration as per the manual as it was way out.

Glad to hear you got it working.

As you've noticed the virtual switch on the iRig Stomp I/O is related to the calibration on the Expression pedal. This means you can calibrate your pedal to what feels good to you. Personally I used a very light touch with my hand for the calibration of the pedal. This way switch is very sensitive, which works great for me, but this may not be ideal for all users.

Hope this helps!

[smcleod012]

Hi, just curious as to when I will be receiving my iRig Stomp?

[DarkStar]

You need to contact Sales Support for that info; this is primarily a user forum.
https://www.ikmultimedia.com/contact-us/ContactIKForm.php