ARC 3 Test withoout chair?

IK Product Manager, Lurssen Mastering Console, CSR (Classik Studio Reverb), and acoustic correction system ARC (Advanced Room Correction) System

ARC 3 Test withoout chair?

Postby ritusgrin » Fri Feb 03, 2023 7:12 pm

I see this has been asked a couple of times but never answered. So I'll give it another shot. It says "Do not stand or sit next to the microphone while the analysis are running" on page 32 of the manual.
So the question is, should I leave my chair there or move it completely out of the path of the speakers?

Thank you.
ritusgrin
 
Posts: 14
Joined: Sun Nov 13, 2016 11:38 am

Re: ARC 3 Test withoout chair?

Postby ritusgrin » Fri Feb 10, 2023 5:10 pm

OK for any future people that may ask this question and find this post, it didn't make much difference between chair in and chair out.
ritusgrin
 
Posts: 14
Joined: Sun Nov 13, 2016 11:38 am

Re: ARC 3 Test withoout chair?

Postby ritusgrin » Tue Apr 11, 2023 2:33 pm

After doing a bunch of testing with REW. Removing the chair gives some high end roll off.
I have a long room. With the chair I get a much flatter high end response. Weird.
It starts to roll off at about 5 to 6k.
I would think ARC would compensate for this quite easily but for now I'm leaving the chair directly behind the mic stand, because its there when I mix and it's giving me a much flatter frequency response.
ritusgrin
 
Posts: 14
Joined: Sun Nov 13, 2016 11:38 am

Re: ARC 3 Test withoout chair?

Postby laserbeak43 » Tue Aug 29, 2023 5:23 pm

Thanks for making this observation and sharing!
laserbeak43
 
Posts: 4
Joined: Tue Aug 29, 2023 8:10 am


Return to Other Music Production Software & Tools

cron