Philharmonik learn control issue

[billwright2]

It seems that when I set CC values through 'Learn' on channel 1, all work well.
Trying to learn on any other channel affects channel 1 and not the channel that you are trying to set up - I am on version 2.06
Please help

[Promidi]

I just tried the following with Miroslav Philharmonik 2.06.

Created two parts, 1 and 2. Set their MIDI channels to 1 and 2 respectively.

I was able to create independent mappings to different parameters to the two parts.

When I mapped the CCs to parameters on part 1, I set my MIDI controller to MIDI channels to 1

When I mapped the CCs to parameters on part 2, I set my MIDI controller to MIDI channels to 2

When I operated the mapped knob on the MIDI controller, only the part that matched the MIDI channel of my MIDI controller moved. I was able to change which part moved by changing the MIDI channel of the MIDI controller.

So the CC mapping on Miroslav Philharmonik 2.06 works here as intended.

You must have missed a step - like changing the MIDI channel of your MIDI controller when you mapped part 2

[billwright2]

OK - I get it - my controller's out on channel one and cannot be controlled through its software to change it while Philharmonik is loaded.

I found that if I load it up as a plugin I can control it through the DAW to set the values for each track.
I didn't realize it could be configured when in VST mode. I thought it had to b programmed in stand-alone mode.

Thanks for the info

[DarkStar]

As far as I recall, it can be programmed in stand-alone mode, but you would need a MIDI controller on which you can change the channel for CC messages. Which MIDI controller are you using?

[billwright2]

Arturia Keylab 88 Essential and its MIDI control center software.
But, using the DAW and setting up from the VST seems to be working fine.
Heck, it eliminates a step as I am setting up my DAW orchestral template at the same time

[billwright2]

Well - Now that I got this far with it I am again frustrated by this product.
I created an instance and spent the time setting up 15 channels for my strings and also setting up all the faders from my controller. All tracks did set up properly for the controller faders.
I saved this as a new preset.

Closed the instrument instance.
Opened a new instrument instance,.
Loaded back the preset

When loading back, all of the instruments loaded, but NONE of the CC controller values were saved with the preset.
Where do I go from here?

[Promidi]

I just saved an MP2 Multi that comprised 2 parts, each with CCs mapped to volumes and pan.

When I loaded that same Multi, the CC assignments were loaded.

Did you save your MP2 configuration as an MP2 Multi?

[billwright2]

I guess I am not sure how to save that way -the only options I found were to save a preset or override the default.
Am I just not seeing a menu of some type ?
Sorry to be such a pest.

[Promidi]

Once you’ve set up your tracks and CC assignment as you would like them, go to the “Multi” tab (See, page 26 of the MP2 User guide)

On the lower left, there is the Multi Menu (See, page 27 of the MP2 User guide).

That is where you can save MP2 Multis