Amplitube 4 and iRig 1

AXE I/O, AXE I/O Solo, iRig Stomp I/O, Guitar and Bass Audio Interfaces/Controllers, iRig Keys I/O and the iRig Keys family of MIDI controllers

Amplitube 4 and iRig 1

Postby sam007 » Sun Aug 16, 2020 1:34 pm

[ Mod: Spilt from an old topic to avoid confusion. ]

I am currently using guitar + irig 1 with asio4all driver in AmpliTube 4 on windows 10. Anyhow I managed to use asio4all to get the signal from Irig 1.
These are my questions:
1. In Audio MIDI setup of AmpliTube 4 (and in Asio4all) I don't see any input named irig 1. Hence I'm using Mic in front panel(Realtek high definition audio) as input, and Realtek HD audio stereo as output into my headphones from irig 1 headphone jack. Is this the correct way or need to change anything?

2. How do I get the Input level in AmpliTube 4 while I play anything on my guitar? I am getting the plain output(without any effects, even after adding one).
sam007
 
Posts: 2
Joined: Sat Aug 15, 2020 9:29 am

Re: Amplitube not getting signal from interface

Postby Peter_IK » Wed Aug 19, 2020 4:42 pm

iRig 1 is an analog interface so it plugs into a combo input/output jack so it won't show up as a named device since only audio data can be passed that way. I would suggest opening a ticket with IK Support via http://www.ikmultimedia.com/contact-support for the AmpliTube issue but note that iRig 1 is not PC compatible officially.
IK Multimedia. Musicians First.
YouTube - Facebook - Twitter
Need help? Our support team will be happy to help and can be reached at this link.
From the rules: Moderator decisions are not a matter for forum discussion and are final.
User avatar
Peter_IK
Kingpin
 
Posts: 19736
Joined: Thu Nov 18, 2010 3:40 pm
Location: Everywhere

Re: Amplitube not getting signal from interface

Postby sam007 » Sat Aug 22, 2020 9:59 am

Peter_IK wrote:iRig 1 is an analog interface so it plugs into a combo input/output jack so it won't show up as a named device since only audio data can be passed that way. I would suggest opening a ticket with IK Support via http://www.ikmultimedia.com/contact-support for the AmpliTube issue but note that iRig 1 is not PC compatible officially.


Can I use sound adapter/card (which are of about 10$ or so) with irig 1 to get the digital input instead of analog input instead of an audio interface into the AmpliTube 4?
sam007
 
Posts: 2
Joined: Sat Aug 15, 2020 9:29 am

Re: Amplitube not getting signal from interface

Postby Peter_IK » Mon Aug 24, 2020 3:45 pm

sam007 wrote:
Peter_IK wrote:iRig 1 is an analog interface so it plugs into a combo input/output jack so it won't show up as a named device since only audio data can be passed that way. I would suggest opening a ticket with IK Support via http://www.ikmultimedia.com/contact-support for the AmpliTube issue but note that iRig 1 is not PC compatible officially.


Can I use sound adapter/card (which are of about 10$ or so) with irig 1 to get the digital input instead of analog input instead of an audio interface into the AmpliTube 4?

On PC? In that case you would just use the USB audio interface cable, as adding iRig 1 into the chain wouldn't add any benefit.

A Windows-compatibile interface is recommended and in the end probably wouldn't cost much more than trying to somehow work in a 10 year old analog connection with adapters and such. We have many at https://www.ikmultimedia.com/interfaces
IK Multimedia. Musicians First.
YouTube - Facebook - Twitter
Need help? Our support team will be happy to help and can be reached at this link.
From the rules: Moderator decisions are not a matter for forum discussion and are final.
User avatar
Peter_IK
Kingpin
 
Posts: 19736
Joined: Thu Nov 18, 2010 3:40 pm
Location: Everywhere


Return to Interfaces & Controllers