No sound out of Amplitube 4

AmpliTube TONEX, AmpliTube 5, AmpliTube Custom Shop, AmpliTube Joe Satriani, AmpliTube Brian May, MESA/Boogie®,Orange™, Fender™, Hendrix™, Metal, AmpliTube SVX, and more for Mac/PC

No sound out of Amplitube 4

Postby Cobbyco » Sat Sep 07, 2019 2:52 pm

It seems like every time I come back to Amplitube there are problems getting sound out of it but I can't work out what I'm doing wrong.

I'm running it on a MacBook Air with the latest version of OSX. I have the settings on the laptop and within Amplitube set to iRig HD2 and the laptop is showing some input signal but nothing is registering within Amplitube.

The light goes green on the iRig when I play anything and I have volume turned up on my guitar, on the side of the iRigHD, the input level, output level, Master, the amp its set to and I have FX and R selected on the channel.

There are no FX added that could restrict the signal but I am getting no sound out and nothing registering at the input level either.

Any thoughts on what I may be missing?

thx
Cobbyco
 
Posts: 7
Joined: Thu Aug 22, 2019 4:30 pm

Re: No sound out of Amplitube 4

Postby garfy » Sat Sep 07, 2019 3:25 pm

Hi Cobbyco

Had you checked the Privacy settings? You need to make sure that AT4 has access to the Microphone in Mojave. Counter intuitive I know, but it will allow audio to pass through your iRig HD2.

https://support.apple.com/en-us/HT209175

Hope that is the answer.
System Specs: 2012 Mac Mini 2.6 i7 & 2015 MBP 2.2 i7, 16GB RAM
macOS10.15.7 Logic 10.6.1 Reason 11
Various IK, NI, Waves, Softube, Eventide, XLN software
Focusrite 18i20 x 2, Novation ReMote 25SL
garfy
Moderator
 
Posts: 2133
Joined: Thu Oct 20, 2011 6:09 pm
Location: Comfy chair, UK

Re: No sound out of Amplitube 4

Postby Cobbyco » Sun Sep 08, 2019 4:52 pm

Hi,

Thanks for your response but sadly that does not seem to be the issue.
Cobbyco
 
Posts: 7
Joined: Thu Aug 22, 2019 4:30 pm

Re: No sound out of Amplitube 4

Postby Cobbyco » Sun Sep 08, 2019 4:57 pm

Just messing about with this now and if I switch it to Input 2 at the bottom left I get sound but not with Input 1?
Cobbyco
 
Posts: 7
Joined: Thu Aug 22, 2019 4:30 pm

Re: No sound out of Amplitube 4

Postby garfy » Sun Sep 08, 2019 5:14 pm

Cobbyco wrote:Hi,

Thanks for your response but sadly that does not seem to be the issue.


That's a pity. Hopefully someone will chime in with another suggestion. Until then, I would suggest opening a ticket with official IK Support here: https://www.ikmultimedia.com/contact-support/mi/
System Specs: 2012 Mac Mini 2.6 i7 & 2015 MBP 2.2 i7, 16GB RAM
macOS10.15.7 Logic 10.6.1 Reason 11
Various IK, NI, Waves, Softube, Eventide, XLN software
Focusrite 18i20 x 2, Novation ReMote 25SL
garfy
Moderator
 
Posts: 2133
Joined: Thu Oct 20, 2011 6:09 pm
Location: Comfy chair, UK

Re: No sound out of Amplitube 4

Postby Pieter.verkooijen » Fri Dec 25, 2020 10:01 am

After updating AT4 to version 4.10 on my Macbook i was unable to get any input signal.
Turns out enabling mic acces in privacy settings does the trick!

First turn on mic in Apple menu as explained above

In AT4 settings select " built in microphone" > accept > acces settings again > select wanted interface > accept > DONE!

@IK Multimedia: maybe put this in the Mac user FAQ's?


Thank you!
Pieter.verkooijen
 
Posts: 1
Joined: Sat Oct 26, 2019 12:53 pm

Re: No sound out of Amplitube 4

Postby DarkStar » Fri Dec 25, 2020 2:24 pm

----------------
DarkStar ... interesting, if true.
Inspired by ...
User avatar
DarkStar
Hero Of The Week (Moderator)
 
Posts: 8668
Joined: Fri Dec 17, 2010 5:42 pm
Location: Surrey, UK


Return to AmpliTube Guitar Amp & FX modeling