UNO as midi interface?

Discuss UNO Synth Pro, UNO Drum and UNO Synth - IK's analog/pcm drum machine and our true analog synthesizers. Proudly designed and built by IK in Modena, Italy!

UNO as midi interface?

Postby pedech » Sat Nov 16, 2019 7:18 pm

Hello.

I am using the UNO as a midi interface for my iPad. Meaning, I connect a hardware synth to UNO’s midi out and connect UNO to my iPad.
Works great - the iPad controls UNO in channel 2 and the hardware synth in channel 1.
However, when I turn UNO knobs it affects not only UNO’s preset but also the hardware synth’s preset.

Question: is there any setting for UNO’s knobs to control only its own sound without sending out any CC’s to midi out while still in use as a midi interface?
pedech
 
Posts: 10
Joined: Fri Aug 03, 2018 5:47 pm

Re: UNO as midi interface?

Postby mungewell » Sun Nov 17, 2019 2:14 am

There is a setting for sending (or not) the 'Program Change', but it sound like you are having problems with CC messages. UNO only sends these on the channel set on the device (there is a channel for receive and a channel for send), double check that you have set BOTH appropriately.

For example I have mine set to Channel 5... which actually comes out as 4 as Midi counts 0 as a channel.. here's a log of of me turning knob of OSC1 Tuning.
Code: Select all
2019-11-16 18:06:57.495948 control_change channel=4 control=17 value=31 time=0
2019-11-16 18:06:57.506106 control_change channel=4 control=17 value=30 time=0
2019-11-16 18:06:57.526038 control_change channel=4 control=17 value=29 time=0
2019-11-16 18:06:57.536055 control_change channel=4 control=17 value=28 time=0
2019-11-16 18:06:57.642069 control_change channel=4 control=17 value=29 time=0
2019-11-16 18:06:57.651868 control_change channel=4 control=17 value=30 time=0
2019-11-16 18:06:57.661994 control_change channel=4 control=17 value=31 time=0
2019-11-16 18:06:57.671991 control_change channel=4 control=17 value=33 time=0


It could also be that the hardware Synth is listening on all channels (Omni mode on), try seeing if there is a setting for turning that off.
mungewell
 
Posts: 40
Joined: Wed May 29, 2019 3:48 am


Return to UNO Synth Pro, UNO Drum & UNO Synth