MTM firmware update

Discussion about IK monitors and speakers like iLoud Precison, iLoud MTM, iLoud Micro Monitor and iLoud as well as X-MONITOR software.

MTM firmware update

Postby Tony.F » Wed May 25, 2022 1:36 am

This just uses a standard male USB-A to a male USB-B cable? I know that some USB cables are specifically for data and some can also carry power. That isn't the case with this cable in that there is only one type, correct?

Thanks.
Tony.F
 
Posts: 14
Joined: Tue Nov 20, 2018 3:45 am

Re: MTM firmware update

Postby ericmaslim34 » Wed May 25, 2022 10:11 am

I have the same issuesnow rider 3d
ericmaslim34
 
Posts: 1
Joined: Wed May 25, 2022 10:11 am

Re: MTM firmware update

Postby Tony.F » Sat May 28, 2022 10:29 pm

Bought a USB-A to USB-B printer cable and successfully updated my MTM's. procedure is very straightforward.

1. DL the MTM firmware updater.

2. Unzip it (dbl-click).

3. Launch the App.

4. Follow the step-by-step instructions indicated in the pop-up window.
Tony.F
 
Posts: 14
Joined: Tue Nov 20, 2018 3:45 am


Return to IK Monitors and Speakers