I need help setting up for ARC2.

IK Product Manager, Lurssen Mastering Console, CSR (Classik Studio Reverb), and acoustic correction system ARC (Advanced Room Correction) System

I need help setting up for ARC2.

Postby Jerrydpi » Tue May 02, 2017 6:26 am

Hi everyone :)

First time User here, and I need some help setting up my ARC2.


I'm following the Instructions, but I don't understand how to keep the Mic from feedbacking when I pull up the Volume to my normal listening level as instructed in Step 3.

I have adjusted my MIc Input Level to go 1/2 way into the OK area, but as soon as I bring the Volume up I get the feedback.

I'll then lower the Volume just enough to stop the feedback, go to Step 4, but then I get a MultEQ Error that says the measured signal is too low even though output was raised to the maximum available AmpliTube.


What am I doing wrong?

Thanks,
Jerry
Jerrydpi
 
Posts: 3
Joined: Tue May 02, 2017 6:11 am

Re: I need help setting up for ARC2.

Postby BobF3 » Tue May 02, 2017 7:12 pm

Maybe the gain of the preamp you've connected the mic to is too high
BobF3
 
Posts: 127
Joined: Fri May 29, 2015 4:24 pm

Re: I need help setting up for ARC2.

Postby Meltdowns6 » Thu Jan 04, 2018 7:31 pm

You need to turn off direct monitoring. The mike isn't supposed to sound through your monitors.
Meltdowns6
 
Posts: 7
Joined: Tue Sep 05, 2017 4:00 pm

Re: I need help setting up for ARC2.

Postby glass.spur » Mon Aug 23, 2021 6:36 pm

Having the same issue and direct monitoring in cubase is certainly off-
glass.spur
 
Posts: 11
Joined: Fri May 27, 2011 7:27 pm


Return to Other Music Production Software & Tools