strange sync problem Uno Drum and Synth

[jemku66]

for some reason I cannot get a correct tempo sync from uno drum to uno synth. Start/stop works fine, but when the drum reaches step 16 the synth is at step 12.

when the drum uno has 3 cycles of 16, the synth does 2 cycles.

Tempo is set to 1 1 , ext midi

how can I solve this?

[jemku66]

Today I recorded a software drum along with the uno synth at 120 bpm, via DAW,
works great.
And when I manually start the Uno drum at 80 bpm it plays along fine with the 120 bpm recording. There must be something off in the timing.

[Peter_IK]

Since no other users chimed in and this is primarily a user-to-user discussion forum and not a medium for official tech support, if you have further issues I'd recommend reporting them to IK Support at http://www.ikmultimedia.com/contact-support for official and direct technical assistance. Thanks!

[jemku66]

OK problem solved! For future reference:

connect another midi device, goto SEQ (on left side) and then DIVISION and choose 16.
You can also select other tempos here.

[Bryandonwhite23]

connect another midi device, goto SEQ (on left side) and then DIVISION and choose 16.

This was a HUGE help to me. In my case, I was trying to send clock to a brand new EHX-1440 looper pedal, and I had also verified that the pedal appeared to react correctly to clock from my DAW. I would have not figured this with the DIVISION setting out in a thousand years.